This Month's Specials
R6 - Road
Race Tire
Hoosier Racing Tire Sports Car D.O.T.
R6 Radials are Track & Competition DOT tires developed for drivers
who compete in road racing where responsiveness and high levels
of grip in dry conditions is desirable. The R6 Radials are designed
to provide performance advantages over previous R3S05 tires by rewarding
drivers with faster, consistent lap times and extended wear due
to the improved traction and handling.
Price: Call for great pricing |
S197
Naca Ducts
$199.00 |
SN95
Naca Ducts
$199.00 |
Retro
Race Mirrors
$239.00 |
Shelby
GT
Brake Ducts
$149.00 |
S197
Brake
Cooling Kit
$139 |
|
Our 'Racer Kit' includes:
PDR100
520-Line Bullet Camera with 5' Extension
Camera Mount
Cigarette Lighter Adapter
2GB CF Card
CC10 Cradle Mount
Everything you need to get started.
To complete the package, get our accessory bundle and a PDR
mounting bracket.
Note: PDR100 works with NTSC or PAL
formats. Format choice refers to bullet camera.
Details
Weight 3.00 lbs
$ 875.00
 
ChaseCam G-Force Module for the PDR100
The ChaseCam G-Force Module for the PDR100 solid state digital
video recorder is a new hardware integration feature that allows
for truly simple and intuitive on-screen lateral-g and acceleration/braking-g
force text and color graphics. Installed internally, there are
no additional boxes or cables to clutter your racecar. We have
designed the G-Force Module to not require specific mounting
locations or orientations—just quickly set the calibration
feature based on your existing PDR100 mounting location, which
also allows for quick installs in multiple cars.
Features:
Internal installation—no external boxes/wires/power/headache.
Realtime overlay—no need for tedious synching and post-production
editing.
3-axis accelerometer can be calibrated instantly to any mounting
orientation and is resettable.
Data sampled once per video frame (25-30fps)
3-g selectable graphic scale
Color data graphs and text that are positionable (top/bottom)
on-screen
Red/Up= Braking
Green/Down = Acceleration
White/L-R= Lateral-g
No loss in video quality with data overlay.
User-selectable: G-Force “On” or “Off”.
Weighs 0.4oz….that’s less than 3% of a pound!
Can be installed in any PDR100* (excluding PDR100-R), even older
models!
Fully compatible with all ChaseCam products.
The PDR100 G-Force Module (Including Factory
Installation) - Priced at $125.00
ORDER NOW!
(This cannot be used without the PDR100 and must be installed
by our main facility.)
|
|
|
Forgeline
Zx3R Wheels - 3-piece wheels
Each spoke is tapered 10o and
jet nuts are used to reduce weight even further than the original SX3-R
design Each wheel is built with true forged 6061 T6 centers, 6061 T6
spun rim halves, stainless steel fasteners (titanium fasteners and jet
nuts are optional), and feature a powdercoated silver or gunmetal finish
with a polished lip. This design is 3 pounds lighter than the standard
3-piece Forgeline wheels. The ZX3-R is available in sizes from 17x7.0
to 18x13. Since each wheel built to order, Forgeline can offer special
features like custom offsets and a choice of center finishes.
3-piece wheels with Standard
Finish, Ball Polished or Powdercoated Center Silver, Gunmetal, or Black
SN95 & S197- 17
x 9.5
w/ LW Hardware about 16.7 lbs - $956.65
each
w/o LW Hardware about 17.9 lbs - $880.65
each
SN95 & S197- 18
x 9.5
w/ LW Hardware about 20.5 lbs
- $999.4 each
w/o LW Hardware about 21.7 lbs - $880.65 each
Note: Cobra R wheels weigh 23-24 lbs and are 17x9
You save about 5 lbs per wheel and gain an inch in width
|
|
|
SPA Mechanical
4 Liter Multi-Flo AFFF Steel Bottle System
$271.00
|
The SPA Design "Firefighter" Extinguisher Systems are specifically
designed for use in competition vehicles and offer the latest in on board
fire suppression technology. Utilizing SPA "Lite" AFFF (Aqueous
Film Forming Foam) these non-toxic ozone friendly systems give the competitor
the same level of protection whether driving Formula 1 or Club Racing.
Mechanical 4 Liter Multi-Flo AFFF Steel Bottle Systems are designed specifically
for use in closed cockpit cars i.e. Saloon, Rally and Sports cars.
They give an even two-liter split between engine and cockpit compartments
from a single chamber bottle.
MFM400S are FIA approved steel bottle suppression systems that now offer
the competitor a cost effective alternative while still giving all the
performance of more expensive alloy and carbon fiber bottle fire systems.
MFM400S AFFF Steel Bottle Mechanical System Includes:
* 6 Nozzles
* 5 Tee's
* 15 ft. Decabon Tubing
* (1) 6 ft. Pull Cable & (1) 12 ft. Pull Cable
* Charged to 8 Bar
The MFM400S fire extinguisher system has been rigorously tested in conjunction
with the BSI and MSA and fully conform to the latest FIA regulations for
competition vehicles.
|
01 Compound: Increased
initial bite and improved modulation. The friction level has been increased
for the first two-thirds of the braking event, with flatter torque curve
and more linear friction curve compared to 93. 01 is extremely easy on
the discs with very low wear.
97 Compound: Endurance
compound, higher bite than 90 with the lowest wear of all compounds, easy
on discs. Good general use pad.
 |
Common Applications:
'95 - '04 Mustang Cobra (PBR)
Baer Aftermarket Kits (Chevy, Ford, Panoz, Pontiac)
Caliper Type: PBR 2 Piston 40mm
Floating Caliper
4 Pads per Axle Set |
$199.95
 |
Common Applications:
Ford Mustang & Cobra Rear
Caliper Type: Varga
1 Piston 38mm Pin Slider with Hand Brake Actuator
4 Pads per Axle Set
|
$95.95
 |
Common Applications:
Lotus, Mustang Cobra R, Viper Front - Panoz Rear
Caliper Type: Brembo
4 Piston Fixed Caliper
4 Pads per Axle Set
|
$233.59
|
Cool Shirt 12qt Bag System
w/ shirt $360
Cool Shirt 6qt Bag System
w/ shirt $355
The Portable Bag Systems were developed specifically
for those applications that cannot accommodate a hard cooler cooling
unit. These new systems utilize a lightweight, water-proof canvas
denier bag available in 6 quart or 12 quart size with a 12V internal
pump as a completely portable cooling unit.
Portable Bag Systems Include:
* 6 Quart or 12 Quart Bag Cooling Unit with 12V Internal Pump
* Insulated Water Hoses with Connectors
* Original HANS-Friendly COOL SHIRT with connectors (Select Size)
These are Complete Systems with Cotton COOL SHIRT and All Standard
Components Included
|
Cool Shirt Club System 12
w/ shirt $360
The Platinum Club Systems operate on 12 volts and
come standard with a heavy duty 100% cotton COOL SHIRT with over 50
feet of medical grade capillary tubing securely stitched to the front
and back of the garment. A 12 or 24 quart cooling unit with an internal
pump supplies cooled water to the shirt through eight feet of double
insulated water hose with automatic shutoff quick disconnects that
attach the shirt to the unit. The Optional Temperature Control Switch
gives the driver complete control of their comfort while in the race
car.
Total weight on the CLUB-24 system is 4 lbs. while the CLUB-12 system
weighs in at only 3 lbs.
Systems Includes:
* 24 Qt. Cooler / Cooling Unit with Pump (15.5"L x 10.5"W
x 13"H) - Lasts 6+ Hours
or 12 Qt. Cooler / Cooling Unit with Pump (14"L x 9.5"W
x 11"H) - Lasts 3+ Hours
* 8 ft. Double Insulated Water Hose with quick disconnects on both
ends
* 100% Cotton COOL SHIRT with connectors (select size)
This is a Complete System with Cotton COOL SHIRT and All Standard
Components Included
|
|
The brand new Optigrip tire temperature
monitoring system is everything racers have been dreaming about. It’s
a simple affordable system that allows a driver to monitor his real time
tire temperatures. This technology has only been available to large budget
race teams in the past. The system uses 4 small IR sensors mounted in
the wheel wells. An easily mountable LCD screen displays large easy to
read temperatures. The system also includes a memory recall button mountable
near the wheel.
System includes:
1 LCD
4 IR sensors with replicable lenses
15ft mini usb cables
1 junction box
1 power adapter System includes all mounting hardware
Price: $521.95
|
Safety
Solutions C5R Corvette Right Side Driver Nets
Available in Polyester or Kevlar
Materials
The Driver Nets were Engineered by Safety Solutions to be in the correct
place to help control occupant movement and enhance your Safety System.
Engineering that only comes from a company devoted to Lab testing to
make their products Superior.
SFI-37.1 Rated
Superior Design produces higher performance than other driver nets
Highest quality web materials out perform the competition.
Light weight, Heat treated hardware.
Proven effective in sled tests conducted by GM at Wayne State.
Dimensions: length-30 1/2", height-16"
Universal fitment
Kevlar
$151.80
Polyester $110.35
|
5.0L Ford Wiring Harness/86-93
Factory style replacement harness for
this popular Ford EFI engine. Harness comes complete with factory connectors,
terminals, color coded and plugs directly into the factory ECM. Harness
is designed to mount ECM either on the firewall, underneath the dash or
kick panel.
Price: $520.00
|
2005 +(S197) Mustang
Caster/Camber plates
Price: Call for amazing pricing |
